I was hoping to 3d print a head for an engine and use multiple metals for it, like stainless steel for valve seats and the exhaust ports, then tool steels for the bearing for the valves. Is the possib...
Having a PCB with a large number of ws2812b 2020 LEDs, but no ESP32 or other means of signaling on the board (will be added later as a plugin device), how is it possible for PCBWay to test wether the ...
"I want to design a complete PCB with all components for a project. The board should include:1. An ESP32 module,2. 3 channels for DS18B20 temperature sensors,3. A PZEM power meter.However, I'm unable ...
Hi, so I bought this jet engine fan from Nikola Toys, it seems to have burnt out, the USB C controller board, and would like to replace it. Now I'm very new to this space and could get by with solderi...
Do you have a guide for material properties, laser cutting, and bending constraints for 5052 aluminum such as:K factorBend radius (are custom bend radius supported?) Minimum hole sizeMinimum distance ...
Hi, I have 20mm by 20mm board, it's two layers. I have attached the BOM list. Can you tell me which parts you can source and which parts need to be bought from other vendor.How much will be the total ...
I did order ”NovaSM3 v 5.2c ( updated2021-10-21) and i did receive "NovaSM3 v 5.2b, that i already have. (Previouce order)THIS IS A WRONG ORDER , WHAT NOW PLEASE ?
